copper pipe repair

The plumbing system in your home is composed of a variety of pipes. While some pipelines are made to transport clean water, others are made to remove waste water. Depending on their use and the period of time since your home’s construction, the plumbing pipes in it were likely built from a variety of materials. Plumbing pipes have been made from a variety of materials over the years. Therefore, the plumbing pipes in your home’s construction will be made of whatever material was available at the time.

Copper Piping

One of the most popular materials for plumbing pipes is copper. Potable water is mostly transported through these pipes. Because it is resistant to heat, sturdy, less likely to leak, heat-resistant, long-lasting, and non-polluting of the water it passes through, copper is a great material for plumbing pipes. Copper has been used in plumbing systems since ancient Egypt. However, it wasn’t until the 1940s that it started to be utilized regularly in modern times.

Galvanized Steel Pipes

If your house was constructed before the 1960s, the plumbing pipes can be made of galvanized steel. Steel pipes that have been coated with zinc are known as galvanized steel pipes. This coating aids in preventing corrosion on the pipe. Galvanized steel was employed because it was robust, long-lasting, and a good replacement for lead. The drawback of galvanized steel is that it can rust from the inside and is heavy. Low water pressure, frequent blockages, and corrosion may occur in homes with ancient plumbing. In that situation, replacing your galvanized steel pipes or considering pipelining may be necessary. Your pipes’ condition will determine the treatment strategy.

Cast Iron Piping

Sewer pipes were most frequently made of cast iron. Some water supply lines, though, were also made of cast iron. From the 17th to the 20th centuries, cast iron was extensively employed in plumbing, including in the creation of the Versailles fountains. Because of its durability and capacity to bear intense use and pressure, it was frequently used. Cast iron pipes normally survive 80 to 100 years before they begin to corrode internally. Corrosion is typically to blame when a cast iron pipe collapses. If you have cast iron sewer pipes, you should avoid using some chemical drain cleaners because they can accelerate corrosion.

The PVC pipe

Polyvinyl chloride, also known as PVC, is a material that is frequently used in plumbing nowadays. You are likely aware with PVC because it is used to make plastic pipes. PVC is a low-cost material that is lightweight, simple to work with, won’t corrode, and lasts for a very long period. Both potable water and sewage lines use PVC pipes. The pipe’s purpose determines its size and thickness. The fact that extremely hot water might destroy PVC pipes is a drawback.

A CPVC pipe

Chlorine is a component of CPVC pipes, which are made of plastic. They are primarily utilized for potable water. CPVC pipes can be utilized with hot water since they have a greater temperature threshold.

PEX piping

Another typical pipe used for water supply lines is PEX pipe. They don’t corrode, don’t leak, are lightweight, affordable, simple to use, and can take hot water. However, because they are vulnerable to the elements, they cannot be utilized outside. plumbing in your residence It is a good idea to know what you have when it comes to the plumbing pipes in your house. An inspection of your plumbing is a smart idea if it is older. This might assist you in evaluating the state of your plumbing and avert more issues. Contact Turbo Plumbing & Rooter to request a plumbing inspection or to learn more about the plumbing pipes in your home.

Leave a Reply

Your email address will not be published.

You may use these <abbr title="HyperText Markup Language">HTML</abbr> tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

*

Call Now ButtonCALL (818) 740-6830